I know Moog are known for keeping things up their sleeves, but it would be fantastic to know if there are plans to add aftertouch response to the LP via software update. I have a controller with aftertouch and it would be friggin sweet to do filter cutoff sweeps when I lay into the keys on the controller.
Throw us loyal Moogies a bone!
Aftertouch
Aftertouch
Moog-a-holic: Voyager RME, Little Phatty SII w/CV outs, MP-201, VX-352, CP-251, MF-107, MF-102, EP-2 (x2)
Re: Aftertouch
Isn't there a way to route the aftertouch of your controller to the CC-number that corresponds to filter cutoff on the LP?
Re: Aftertouch
Not to my knowledge, but if someone knows...please speak up.
Moog-a-holic: Voyager RME, Little Phatty SII w/CV outs, MP-201, VX-352, CP-251, MF-107, MF-102, EP-2 (x2)
Re: Aftertouch
I don't think the LP keybed has aftertouch sensors but I could be wrong.
Unlike the Voyager which uses a higher end Fatar, the LP is marketed at a slight lower end consumer market.
None of the sub-1300 usd synths from Korg, Roland, etc support aftertouch.
Have to reduce cost somewhere...
.
Unlike the Voyager which uses a higher end Fatar, the LP is marketed at a slight lower end consumer market.
None of the sub-1300 usd synths from Korg, Roland, etc support aftertouch.
Have to reduce cost somewhere...
.
'76 Minimoog, Taurus 3, Oberheim FVS + Son of 2-voice; Sequential ProOne; Juno 106; Moog Model 15; Kurzweil 250; Hammond M3; and a handful of Fender Basses Flickr!
Re: Aftertouch
... AT for stuff like vibrato, trem, etc., could be cool. for filter sweeps, though, nothing beats an expression pedal hooked to the Filter CV... I had AT on my old Oberheim for years, and never really put it to good use... but that's just me.
Re: Aftertouch
There are software applications that take incoming MIDI CC data and outputs it as other CC. I haven't tried this myself but I guess that e.g. http://www.bluecataudio.com/Products/Pr ... teControl/ should do the job.Reggie T wrote:Not to my knowledge, but if someone knows...please speak up.
But the pedal idea seems easier!
Re: Aftertouch
All good advice folks. I'm already using the pedal idea with a MP-201. Just thought aftertouch would be fun. I'll look into Blue Cat.
Thanks guys!
Thanks guys!
Moog-a-holic: Voyager RME, Little Phatty SII w/CV outs, MP-201, VX-352, CP-251, MF-107, MF-102, EP-2 (x2)