Sub Phatty Oscillator 2 Wave Problems

Everything Sub.
Post Reply
ElektroMoog
Posts: 1
Joined: Thu Aug 06, 2015 12:33 pm

Sub Phatty Oscillator 2 Wave Problems

Post by ElektroMoog » Thu Aug 06, 2015 12:42 pm

Hello, i need help regarding my Sub Phatty. I have used my Sub Phatty for 6 months without issue. All of a sudden, my Oscillator 2 waveis not accurate. Square and Pulse wave have only one sound which seems like a Triangle wave. Even at zero position, it already start to sound like a Saw wave. The only accurate sound is when I move the knob to Saw wave. Other than that position, it sounds like a Triangle or Sine wave all the way. But my Oscillator 1 have no problem whatsoever.. Please help me and I did try the knob calibration procedure but still does not work..
Top
Control_Voltage
Posts: 119
Joined: Mon Sep 16, 2013 12:59 pm

Re: Sub Phatty Oscillator 2 Wave Problems

Post by Control_Voltage » Fri Aug 07, 2015 9:55 am

Hi ElektroMoog,

Andy from Moog tech Support here.

This could be either a calibration issue related to the pot, or possibly a hardware issue.

Please contact me directly for further support: [email protected] or by phone 828-251-0090 xt 221 or 204 or 217.

Thanks,
Andy Hughes
Moog Tech Support
Top
Post Reply

Return to “Subsequent 37 & Subsequent 25”