Has anyone else experienced this?
Could this just be a problem with my specific unit?
Sometimes when I play a line in latch-mode (using the foot pedals not MIDI)
the sound engine locks up:
a given note, e.g. the 'a', persists (as it should), but
hitting another note, e.g. 'b', doesn't do anything.
Hitting 'a' again does turn off the sound (as it should),
and allows another note to be struck,
but then that note will still be in the same locked state.
Toggling the latch (octave) foot-switch fixes the problem.
This happens at (apparently) random times while playing
relatively fast passages in this mode.
I've upgraded the firmware from 1.13 to 1.2:
this seems to have reduced the frequency that these lockups
occur, but not eliminate them.
Dave
bug: Latch mode locks up
Re: bug: Latch mode locks up
I am also experiencing the exact issue you've described. I've updated to the latest firmware (2.0.2) from 1.13, however the problem still persists. It appears to happen quite often too, usually after every 5-10 minutes while operating in latch mode.
I really hope the Moog developers are still providing support on the T3, because this bug really hurts when playing live. I'm not holding my breath on this one though, as this issue seems to have been hanging around in every version...
I really hope the Moog developers are still providing support on the T3, because this bug really hurts when playing live. I'm not holding my breath on this one though, as this issue seems to have been hanging around in every version...
-
- Posts: 600
- Joined: Fri Jun 06, 2008 8:43 am
Re: bug: Latch mode locks up
As you mention foot pedals I assume your are referring to the Taurus 3. Firmware 1.2 is old. Try the latest firmware 2.0.2:
http://www.moogmusic.com/downloads
Back up your patches first.
http://www.moogmusic.com/downloads
Back up your patches first.
http://soundcloud.com/luke-antony
Re: bug: Latch mode locks up
To summarize my previous post (which I tried editing, and it has since disappeared)...
I'm on 2.0.2 right now, upgraded from 1.13, and I also get the same issue. Try activating latch mode on yours and play around in it for 5-10 minutes, and you'll experience the lock up. I LOVE my Taurus, but this is a big annoyance for me, since I use latch mode 80% of the time. I hope it can get sorted out in a future patch.
Josh
I'm on 2.0.2 right now, upgraded from 1.13, and I also get the same issue. Try activating latch mode on yours and play around in it for 5-10 minutes, and you'll experience the lock up. I LOVE my Taurus, but this is a big annoyance for me, since I use latch mode 80% of the time. I hope it can get sorted out in a future patch.
Josh
-
- Posts: 600
- Joined: Fri Jun 06, 2008 8:43 am
Re: bug: Latch mode locks up
That was weird - I couldn't even see your post and thought the other post was a new one (I now see it's actually from Feb), so I was answering that one!
Anyway I will try and repeat the issue. I still think there are some bugs in the T3. I also saw this:
Anyway I will try and repeat the issue. I still think there are some bugs in the T3. I also saw this:
Which also needs checking.Postby bichuelo » Mon Sep 17, 2012 2:26 pm
I am using version 2.0.2 and it seems that the LFO misbehaves when it receives MIDI clock. If you select either square or triangle waveforms, the LFO doesn't work, and when you select either ramp or saw, it works as a square wave
Can anyone reproduce this behaviour? The LFO works fine when it doesn't receive MIDI...
http://soundcloud.com/luke-antony
Re: bug: Latch mode locks up
I still have the note latch problem. Is it resolved yet?
Re: bug: Latch mode locks up
Hy everyone , yes I have the same latch issue with mine ...